Synology Setup Guide

Prerequisites

DSM 7.x (DSM 6.x works but Container Manager is called Docker Station)
Admin access

Step 1 — Enable SSH

DSM → Control Panel → Terminal & SNMP → Terminal tab → enable SSH service.

Step 2 — Install Container Manager

DSM → Package Center → search "Container Manager" → install.

Step 3 — Run the setup script

Fill in your values at the top of scripts/synology-setup.sh, then run:

bash scripts/synology-setup.sh

This will:

Create /volume1/backups/restic (REST server data)
Create /volume1/images (monthly SD card images)
Write an htpasswd file for REST server auth
Start the restic/rest-server Docker container on port 8000

Step 4 — Configure NFS for image backups

DSM → Control Panel → File Services → NFS:

Enable NFS service (NFSv4 recommended)
Go to Shared Folder → select (or create) the images folder → Edit → NFS permissions
Add a rule:
- Hostname/IP: your Pi subnet (e.g. 192.168.1.0/24)
- Privilege: Read/Write
- Squash: No mapping
- Security: sys

Step 5 — Verify

# Test REST server (from any host on your network)
curl http://restic:YOUR_PASSWORD@SYNOLOGY_IP:8000/

# Test NFS mount (from a Pi)
sudo mount -t nfs SYNOLOGY_IP:/volume1/images /mnt/test
ls /mnt/test
sudo umount /mnt/test

REST Server Management

# View logs
ssh admin@synology "docker logs restic-rest-server"

# Restart
ssh admin@synology "docker restart restic-rest-server"

# Check running
ssh admin@synology "docker ps | grep restic"

Storage Layout

/volume1/
  backups/
    restic/          ← shared restic repo (all devices, dedup'd)
      .htpasswd      ← REST server auth
      config         ← restic repo metadata
      data/          ← deduplicated backup data
      index/
      keys/
      locks/
      snapshots/
  images/
    pi1/
      pi1-2025-01-01.img.gz
      pi1-2025-02-01.img.gz
      pi1-2025-03-01.img.gz
    pi2/
      ...

Firewall (if enabled on Synology)

Allow inbound TCP on port 8000 from your Pi VLANs. NFS uses TCP/UDP 2049 — allow from Pi subnets.

2.1 KiB Raw Permalink Blame History