Add EV charging advice notification to status page

Uses hourly PV forecast data (watts per hour from forecast.solar) to
find the first contiguous block of hours where:
  PV production - base_load_w >= min_surplus_w

Shows a blue advice card on the status page:
  "Auto einstecken bis HH:MM Uhr"
  "Erwartetes Überschuss-Fenster: HH:MM – HH:MM Uhr"

Card is hidden when:
- No surplus window found (weak forecast day)
- Window has already started or passed
- A wallbox is currently active (car already charging)

Config: forecast.base_load_w (1000W), forecast.min_surplus_w (1800W)
Timestamp parsing handles both "HH:MM:SS" and "HH:MM" key formats.
Today: surplus window 11:00–13:00 (24.3 kWh forecast).

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

configs/ems-config.yaml

@@ -98,6 +98,8 @@ forecast:
   fetch_interval: "4h"      # re-fetch during the day (free tier: 12 req/day → 3 fetches)
   fetch_window_start: "07:00"
   fetch_window_end: "19:00"
+  base_load_w: 1000         # typical house consumption used for surplus estimate (W)
+  min_surplus_w: 1800       # min export surplus to trigger wallbox — matches wallbox_a threshold
 
 # EMS operational settings
 ems:

internal/config/config.go

@@ -131,12 +131,14 @@ type ForecastConfig struct {
 	Enabled          bool    `yaml:"enabled"`
 	Lat              float64 `yaml:"lat"`
 	Lon              float64 `yaml:"lon"`
-	Declination      int     `yaml:"declination"`   // panel tilt in degrees
+	Declination      int     `yaml:"declination"`        // panel tilt in degrees
-	Azimuth          int     `yaml:"azimuth"`        // degrees from south (south=0, west=90)
+	Azimuth          int     `yaml:"azimuth"`            // degrees from south (south=0, west=90)
-	KWp              float64 `yaml:"kwp"`            // installed peak power
+	KWp              float64 `yaml:"kwp"`                // installed peak power
-	FetchInterval    string  `yaml:"fetch_interval"` // how often to re-fetch during the day (e.g. "4h")
+	FetchInterval    string  `yaml:"fetch_interval"`     // how often to re-fetch during the day
-	FetchWindowStart string  `yaml:"fetch_window_start"` // e.g. "07:00" — no fetches before this
+	FetchWindowStart string  `yaml:"fetch_window_start"` // e.g. "07:00"
-	FetchWindowEnd   string  `yaml:"fetch_window_end"`   // e.g. "19:00" — no fetches after this
+	FetchWindowEnd   string  `yaml:"fetch_window_end"`   // e.g. "19:00"
+	BaseLoadW        float64 `yaml:"base_load_w"`        // typical house consumption for surplus estimate (W)
+	MinSurplusW      float64 `yaml:"min_surplus_w"`      // min export needed to trigger wallbox charging (W)
 }
 
 func (f *ForecastConfig) FetchIntervalParsed() time.Duration {

internal/forecast/forecast.go

@@ -6,6 +6,8 @@ import (
 	"fmt"
 	"log/slog"
 	"net/http"
+	"sort"
+	"strings"
 	"sync"
 	"time"
 
@@ -14,9 +16,11 @@ import (
 
 // Result holds the fetched forecast for a single day.
 type Result struct {
-	Date      time.Time
+	Date               time.Time
-	TotalKWh  float64
+	TotalKWh           float64
-	FetchedAt time.Time
+	FetchedAt          time.Time
+	SurplusWindowStart time.Time // first hour where PV surplus exceeds wallbox threshold
+	SurplusWindowEnd   time.Time // last hour of that contiguous block
 }
 
 // Quality returns a human-readable label based on configured thresholds.
@@ -151,6 +155,7 @@ func parseTimeOfDay(s string, ref time.Time) (time.Time, error) {
 // forecastResponse is the forecast.solar API response structure.
 type forecastResponse struct {
 	Result struct {
+		Watts        map[string]float64 `json:"watts"`         // instantaneous W per hour slot
 		WattHoursDay map[string]float64 `json:"watt_hours_day"`
 	} `json:"result"`
 	Message struct {
@@ -201,11 +206,72 @@ func (c *Client) fetch(ctx context.Context, day time.Time) (Result, error) {
 		FetchedAt: time.Now(),
 	}
 
+	// Compute surplus window if thresholds are configured
+	if c.cfg.MinSurplusW > 0 {
+		result.SurplusWindowStart, result.SurplusWindowEnd =
+			computeSurplusWindow(fr.Result.Watts, day, c.cfg.BaseLoadW, c.cfg.MinSurplusW)
+	}
+
 	c.logger.Info("forecast fetched",
 		"date", dateKey,
 		"kwh", result.TotalKWh,
 		"quality", result.Quality(c.strategic),
+		"surplus_start", formatOptionalTime(result.SurplusWindowStart),
+		"surplus_end", formatOptionalTime(result.SurplusWindowEnd),
 	)
 
 	return result, nil
 }
+
+// computeSurplusWindow finds the first contiguous block of hours in the hourly
+// forecast where PV production minus house base load meets the minimum surplus
+// threshold (i.e. enough export to charge a car).
+// Returns zero times if no such window exists.
+func computeSurplusWindow(watts map[string]float64, day time.Time, baseLoadW, minSurplusW float64) (start, end time.Time) {
+	type slot struct {
+		t time.Time
+		w float64
+	}
+
+	dayStr := day.Format("2006-01-02")
+	var slots []slot
+
+	for k, v := range watts {
+		if !strings.HasPrefix(k, dayStr) {
+			continue
+		}
+		// forecast.solar may return timestamps with or without seconds
+		t, err := time.ParseInLocation("2006-01-02 15:04:05", k, day.Location())
+		if err != nil {
+			t, err = time.ParseInLocation("2006-01-02 15:04", k, day.Location())
+		}
+		if err != nil {
+			continue
+		}
+		slots = append(slots, slot{t, v})
+	}
+
+	sort.Slice(slots, func(i, j int) bool {
+		return slots[i].t.Before(slots[j].t)
+	})
+
+	for _, s := range slots {
+		if s.w-baseLoadW >= minSurplusW {
+			if start.IsZero() {
+				start = s.t
+			}
+			end = s.t.Add(time.Hour)
+		} else if !start.IsZero() {
+			break // first contiguous block ended
+		}
+	}
+
+	return
+}
+
+func formatOptionalTime(t time.Time) string {
+	if t.IsZero() {
+		return "-"
+	}
+	return t.Format("15:04")
+}

internal/status/status.go

@@ -136,6 +136,13 @@ type forecastView struct {
 	Quality   string
 }
 
+type chargingAdviceView struct {
+	Show         bool
+	PlugInBy     string // e.g. "11:30"
+	WindowStart  string // e.g. "12:00"
+	WindowEnd    string // e.g. "16:00"
+}
+
 type pageData struct {
 	LastUpdate       time.Time
 	ErrMsg           string
@@ -150,6 +157,7 @@ type pageData struct {
 	HasPhaseData     bool
 	Phases           []phaseView
 	Forecast         forecastView
+	ChargingAdvice   chargingAdviceView
 	Consumers        []consumerView
 }
 
@@ -253,6 +261,25 @@ func (s *Store) Handler() http.HandlerFunc {
 				Icon:      s.fcResult.QualityIcon(s.strategic),
 				Quality:   s.fcResult.Quality(s.strategic),
 			}
+
+			// Charging advice: show when surplus window is ahead and no wallbox is active
+			ws := s.fcResult.SurplusWindowStart
+			we := s.fcResult.SurplusWindowEnd
+			now := time.Now()
+			wallboxActive := s.consumers[engine.ConsumerWallboxA].active ||
+				s.consumers[engine.ConsumerWallboxB].active
+			if !ws.IsZero() && now.Before(ws) && !wallboxActive {
+				plugBy := ws.Add(-30 * time.Minute)
+				if plugBy.Before(now) {
+					plugBy = ws // less than 30 min to window — just show window start
+				}
+				data.ChargingAdvice = chargingAdviceView{
+					Show:        true,
+					PlugInBy:    plugBy.Format("15:04"),
+					WindowStart: ws.Format("15:04"),
+					WindowEnd:   we.Format("15:04"),
+				}
+			}
 		}
 		for _, c := range consumerOrder {
 			rec := s.consumers[c]
@@ -415,6 +442,33 @@ h1 { font-size: 1.4rem; font-weight: 700; color: #14532d; }
   margin-top: 0.1rem;
 }
 
+/* Charging advice card */
+.advice-card {
+  background: #eff6ff;
+  border: 1px solid #bfdbfe;
+  border-radius: 14px;
+  padding: 0.85rem 1rem;
+  margin-bottom: 1.25rem;
+}
+.advice-title {
+  font-size: 0.78rem;
+  font-weight: 700;
+  color: #1d4ed8;
+  text-transform: uppercase;
+  letter-spacing: 0.05em;
+  margin-bottom: 0.4rem;
+}
+.advice-main {
+  font-size: 1rem;
+  font-weight: 700;
+  color: #1e3a8a;
+}
+.advice-sub {
+  font-size: 0.78rem;
+  color: #3b82f6;
+  margin-top: 0.2rem;
+}
+
 /* Live power badge on consumers */
 .power-badge {
   font-size: 0.72rem;
@@ -583,6 +637,16 @@ h1 { font-size: 1.4rem; font-weight: 700; color: #14532d; }
 
 </div>
 
+{{if .ChargingAdvice.Show}}
+<div class="advice-card">
+  <div class="advice-title">🔌 Ladeempfehlung</div>
+  <div class="advice-main">Auto einstecken bis {{.ChargingAdvice.PlugInBy}} Uhr</div>
+  <div class="advice-sub">
+    Erwartetes Überschuss-Fenster: {{.ChargingAdvice.WindowStart}} – {{.ChargingAdvice.WindowEnd}} Uhr
+  </div>
+</div>
+{{end}}
+
 <div class="section-title">Verbraucher</div>
 
 {{range .Consumers}}