OpenBAO — Home Lab Deployment

Single-node OpenBAO (v2.5.5) running via Docker Compose with integrated Raft storage. Suitable for a self-hosted home lab.

Layout

File	Purpose
docker-compose.yml	Main node + openbao-unsealer sidecar, Raft volumes
config/openbao.hcl	Main server config: Raft storage, TCP listener, UI
config/seal.hcl	Transit auto-unseal stanza (git-ignored — holds a token)
config-unsealer/	Config for the transit unsealer instance
policies/admin.hcl	Non-root admin policy
scripts/, systemd/	Automated cert renewal (timer + script)
ca/	Internal root CA cert (public — for trusting on devices)

1. Start the server

docker compose up -d
docker compose logs -f openbao   # watch startup

The server starts sealed and uninitialized — this is expected.

2. Initialize (one time only)

This generates the unseal keys and the initial root token. Run it once.

docker compose exec openbao bao operator init \
  -key-shares=5 -key-threshold=3 -format=json > init-output.json

⚠️ init-output.json contains your unseal keys and root token. Store them in a password manager and delete the file afterward. It is git-ignored, but treat it like the master key to everything — because it is.

3. Unseal — automatic (transit auto-unseal)

The main node auto-unseals via the openbao-unsealer sidecar (transit seal, see "Auto-unseal" below). You normally never unseal it by hand. The original 5 Shamir keys are now recovery keys (for root-token regen / recovery operations), not unseal keys.

First-time bring-up only: a brand-new install is Shamir-sealed until you run bao operator init + bao operator unseal (3 keys) once, before migrating to transit auto-unseal.

Auto-unseal (transit via the unsealer sidecar)

openbao-unsealer is a tiny second OpenBAO instance that holds one transit key (autounseal). The main node's config/seal.hcl points at it and unwraps its root key on every start — so main-node restarts/upgrades need no manual unseal.

main openbao ──seal:transit──▶ openbao-unsealer (transit/autounseal)

• The unsealer itself is Shamir-sealed (1 key). Its key + root token are in unsealer-init.json (git-ignored). On a full host reboot the unsealer comes up sealed, so unseal it once and the main node follows automatically:

  docker compose exec openbao-unsealer bao operator unseal <unsealer-key>
  

• Caveat: the unsealer currently runs on the same host (SPOF). For real separation, relocate it to another host and point seal.hcl at it. To make host reboots fully hands-off, give the unsealer its own boot-unseal.

4. Log in & use

Day-to-day: use the non-root admin user (userpass auth, admin policy). Credentials are in admin-credentials.txt (git-ignored) — change the password and move it to your password manager.

# Local CLI (plaintext API is bound to loopback only):
export BAO_ADDR=http://127.0.0.1:8200
docker compose exec openbao bao login -method=userpass username=admin

# Break-glass only:
docker compose exec openbao bao login          # paste the root token

The admin policy (policies/admin.hcl) grants full day-to-day administration but not root-only operations (sys/raw, root-token generation, rekey). Keep the root token offline.

Enabled secrets engines

Engine	Path	Notes
KV v2	secret/	static key/value secrets
SSH	ssh/	SSH CA — sign short-lived host/client certs (needs CA + roles configured)
PKI	pki/	internal CA, max lease 10y (needs root/intermediate CA generated)
TOTP	totp/	2FA code generation/validation
Transit	transit/	encryption-as-a-service (needs a key created)

These are mounted but not yet configured (no CAs/keys/roles). Each engine mounted at a new path has a matching rule in policies/admin.hcl; add one per future engine.

docker compose exec openbao bao kv put secret/myapp/db password=s3cr3t
docker compose exec openbao bao kv get secret/myapp/db

Access via Traefik (LAN-only HTTPS)

OpenBAO is fronted by the Traefik stack (../Traefik) at https://openbao.famfi.home — restricted to 192.168.0.0/16, TLS terminated by Traefik (default self-signed cert).

• Traefik dynamic config: /srv/TRAEFIK/etc/traefik/traefik.d/openbao.yml
• Traefik reaches the container by name (http://openbao:8200) over the shared traefik_proxy Docker network.
• DNS action required: add an A record openbao.famfi.home → 192.168.0.142 (the websecure entrypoint IP) on your LAN DNS, or a hosts entry on clients.
• The built-in web UI is served at https://openbao.famfi.home once DNS is set.
• TLS uses a trusted cert from OpenBAO's own internal CA (see PKI section below) — once you install the root CA on a device, no browser warnings and no BAO_SKIP_VERIFY needed.

Internal CA (PKI) & the openbao.famfi.home cert

OpenBAO runs a two-tier internal CA and issues the cert Traefik serves:

Mount	Role	TTL
pki/	Root CA (famfi.home Internal Root CA)	10y
pki_int/	Intermediate CA (famfi.home Intermediate CA)	5y
pki_int/roles/famfi-home	issuing role for *.famfi.home	90d max

The leaf for openbao.famfi.home lives in Traefik at /srv/TRAEFIK/etc/traefik/tls/openbao/ and is loaded via /srv/TRAEFIK/etc/traefik/traefik.d/tls-openbao.yml.

Trust the CA on your devices (one time) using ca/famfi-home-root-ca.pem:

# Linux (Debian/Ubuntu family):
sudo cp ca/famfi-home-root-ca.pem /usr/local/share/ca-certificates/famfi-home-root-ca.crt
sudo update-ca-certificates
# macOS: add to Keychain and mark trusted.  Windows: import to "Trusted Root CAs".
# Browsers (Firefox) use their own store — import there too.

Issue a cert for another .home service:

docker compose exec openbao bao write pki_int/issue/famfi-home \
  common_name="gitea.famfi.home" ttl=2160h

Renewal is automated. scripts/renew-openbao-cert.sh re-issues the leaf and reinstalls it for Traefik (rewriting traefik.d/tls-openbao.yml to force a reload — changing the cert file alone does not trigger one). A systemd timer (systemd/openbao-cert-renew.timer, installed to /etc/systemd/system) runs it daily; the script no-ops until the cert is within 21 days of expiry. The scoped renewal token lives at /etc/openbao-cert-renew.token (root-only).

sudo systemctl list-timers openbao-cert-renew.timer   # next run
sudo /home/lutz/Projects/OpenBAO/scripts/renew-openbao-cert.sh --force  # renew now

SSH access via OpenBAO (signed certificates)

The ssh/ engine is an SSH CA (RSA-4096; pubkey in ca/openbao-ssh-ca.pub) with two roles:

Role	Signs	Used for
user	user certs (8h)	logging into hosts as a principal (e.g. lutz) — no authorized_keys
host	host certs (3y)	clients verify host identity — no "unknown host" prompts

Log in (signs a fresh 8h cert, then connects):

scripts/ssh-login.sh 192.168.0.26          # user lutz by default
scripts/ssh-login.sh --sign-only HOST      # just refresh the cert

Auth to OpenBAO uses a scoped ssh-sign-user periodic token at ~/.config/openbao/ssh-sign.token (can only call ssh/sign/user).

Onboard a new host — one command generates everything:

scripts/prepare-host.sh 192.168.0.30            # IP you'll SSH to
scripts/prepare-host.sh 192.168.0.30 --hostname pi.famfi.home   # extra principal

It authorizes the host's principal on ssh/roles/host, signs its host cert, writes a self-contained installer to artifacts/openbao-ssh-setup-on-<host>.sh, and adds @cert-authority for it to your ~/.ssh/known_hosts. Needs no SSH access to the target (uses ssh-keyscan). Then finish on the target (as root):

scp artifacts/openbao-ssh-setup-on-<host>.sh <user>@<host>:/tmp/
ssh <user>@<host> 'sudo bash /tmp/openbao-ssh-setup-on-<host>.sh'   # additive, no lockout
scripts/ssh-login.sh <host>                     # sign a user cert + connect

The installer just adds these sshd directives (additive):

TrustedUserCAKeys /etc/ssh/openbao_user_ca.pub          # trust user certs
HostCertificate  /etc/ssh/ssh_host_ed25519_key-cert.pub # present host cert

Client trust for host verification — one line in ~/.ssh/known_hosts:

@cert-authority <host-or-pattern> <contents of ca/openbao-ssh-ca.pub>

Currently wired: 192.168.0.26 (pifour) — user login as lutz + host verification, both confirmed.

Git credential via OpenBAO

The push credential for the gitea remote is stored in OpenBAO KV (secret/gitea/push) and served to git by a credential helper — no token in ~/.git-credentials.

• scripts/git-credential-openbao.sh — git credential helper; on get it reads secret/gitea/push from OpenBAO (API + scoped read-only token at ~/.config/openbao/git-cred.token) and returns username/password.
• scripts/store-gitea-cred.sh — one-time: prompt (hidden) for the gitea PAT and write it to secret/gitea/push.
• Wired per-host so it only answers for gitea: git config credential.http://192.168.0.234:8765.helper <path>

Rotate the PAT by re-running store-gitea-cred.sh. The helper token is a periodic, read-only token scoped to just that one KV path.

Personal credential backup — two playground scenarios

Two isolated setups to evaluate using OpenBAO as a backup for personal passwords. Both are deliberately excluded from the admin policy (only root is break-glass), so your day-to-day admin token cannot read them.

Scenario A — structured KV (personal/ KV v2, versioned):

scripts/personal-put.sh github      # prompts user/password(hidden)/url
scripts/personal-list.sh
scripts/personal-get.sh github           # all fields
scripts/personal-get.sh github password  # one field

Scenario B — transit-encrypted blob (transit-personal/ key personal-backup; OpenBAO holds only the key, the ciphertext is portable):

scripts/secret-encrypt.sh passwords-export.csv   # -> passwords-export.csv.vaultenc
scripts/secret-decrypt.sh passwords-export.csv.vaultenc out.csv

Scoped tokens live in ~/.config/openbao/{personal-kv,personal-transit}.token. Trade-offs discussed inline; A = granular/versioned but OpenBAO holds plaintext, B = OpenBAO holds only ciphertext (store the blob anywhere offsite).

Consuming a secret from a system (AppRole)

How a service should authenticate (vs. a static token on disk): it holds a RoleID (non-secret) + SecretID (secret), logs in for a short-lived token, then reads. Demo role demo-app can read only secret/demo-app/*.

scripts/app-get-secret.sh demo-app/config
# authenticated: token ttl=1200s policies=["default","demo-app"]
# { "api_key": "...", "db_url": "..." }

RoleID/SecretID in ~/.config/openbao/approle/. The minted token is 20m TTL and scoped to demo-app only — proven denied on other paths. This is the recommended pattern for real services; the static-token helpers elsewhere in this repo are the simpler home-lab shortcut.

Backups (Raft snapshots) — automated

scripts/backup-raft-snapshots.sh snapshots both instances and prunes to the newest KEEP (default 14). A systemd timer (openbao-backup.timer) runs it daily at ~02:30. Snapshots land in /var/backups/openbao/{main,unsealer}/ (root-only, 0600). Scoped backup tokens: /etc/openbao-backup.token, /etc/openbao-unsealer-backup.token.

sudo /home/lutz/Projects/OpenBAO/scripts/backup-raft-snapshots.sh   # run now
sudo systemctl list-timers openbao-backup.timer                     # next run

⚠️ Backups are local to this Pi — if the disk dies you lose data and backups. Add an offsite copy (e.g. rsync the snapshot dirs to a Synology) for real DR. This is the most valuable next hardening step.

Disaster-recovery set (keep these together, offsite)

To rebuild from nothing you need all of:

1. A main snapshot and an unsealer snapshot (same run).
2. unsealer-init.json — the unsealer's unseal key (without it the unsealer can't be unsealed, so the main node can't be transit-unsealed).
3. init-output.json — the main node's recovery keys + root token.

Restore outline

# 1. Restore the unsealer, unseal it (so transit auto-unseal works again):
docker compose cp <unsealer.snap> openbao-unsealer:/tmp/u.snap
docker compose exec openbao-unsealer bao operator raft snapshot restore /tmp/u.snap
docker compose exec openbao-unsealer bao operator unseal <unsealer-key>
# 2. Restore the main node (it auto-unseals via the unsealer):
docker compose cp <main.snap> openbao:/tmp/m.snap
docker compose exec openbao bao operator raft snapshot restore /tmp/m.snap

Hardening checklist (before storing real secrets)

• Put TLS in front (Traefik, LAN-only, trusted internal-CA cert)
• Create a non-root admin policy + user; stop using the root token day-to-day
• Enable auto-unseal (transit via the openbao-unsealer sidecar)
• Automate cert renewal (systemd timer)
• Move the root token + recovery keys offline (out of init-output.json)
• Schedule the snapshot backup (systemd timer, both instances)
• Copy snapshots offsite (e.g. rsync to a Synology) — backups are local-only
• Disable or encrypt swap on the host (OpenBAO 2.x dropped mlock support)
• (Optional) Relocate the unsealer to a second host; consider 3-node HA